Connect Prolojik to KODE OS for lighting data integration
Overview
Use this integration to connect Prolojik to KODE OS. You can ingest lighting data through MQTT push collection with snapshot mode and monitor Prolojik points from Data Sources.Supported Capabilities
- MQTT Data Collection
Prerequisites
- Access to the MQTT broker used by Prolojik
- Broker hostname, port, and credentials
- KODE OS environment with access to Data Sources
Configure Connector in KODE OS
- Navigate to Data Sources in your building
- Click API Catalog and search for Prolojik
- Click + Add Datasource
- Fill in the fields below and complete the three-page setup flow
Devices and Points
When you discover devices from Prolojik, KODE OS maps them to the following device types and data points:Lighting Fixture
Canonical Type:lighting
What Data You Get
Point History
Time-series readings including power, volts, runtime, output_level, output_command, occupancy, illuminance, lcm_mode_status, collected at regular intervals from connected devicesPolling Schedule
- Point History
Use Cases
Once connected, this integration enables you to:- Monitor lighting system status, energy usage, and occupancy-driven behavior
- Coordinate lighting schedules with HVAC and building automation systems
- Track lighting energy consumption and identify optimization opportunities
Troubleshooting
No data arriving from MQTT broker
No data arriving from MQTT broker
Verify the MQTT broker hostname, port, and credentials. Check that the topic patterns match the topics being published by the Prolojik devices. Ensure the MQTT client has subscribe permissions.
Data collection stops or gaps appear
Data collection stops or gaps appear
Check the connector status on the Data Sources page. If the status shows an error, review the error logs on the connector detail page. Common causes include expired credentials, network changes, or rate limiting by the Prolojik API.